The cause can be geometry, spring balance, rebound, compression, tyre choice or rider loading.
Why the front misses the line
Front-end push happens when the front tyre is not generating enough cornering grip for the chosen line. The cause can be too little load on the front, excessive fork height in the stroke, harshness that makes the tyre skip or rebound that stops the wheel following the surface.
Setup direction
Check tyre condition, fork height, sag balance and braking attitude before making damping changes. Small geometry or spring-balance changes often reveal whether the problem is load transfer or fork movement control.
Workshop checklist
- Record whether the push appears on entry, mid-corner or under throttle.
- Measure front and rear sag to confirm chassis balance.
- Test fork rebound and compression changes separately on the same corner.
- Check fork alignment and service condition if the front feels harsh and vague.
Next step
Use the calculator for stack comparison, the handbook for deeper theory, or the workshop booking form when the bike needs service or valving work.